Поиск описания ошибки станка Haas по её коду
Введите номер ошибки (код тревоги) или выберите её из списка:
859 ATC SHUTTLE MOTOR ELECTRICAL FAULT
No motor current was measured after the ATC carousel was commanded ON. Check the motor power cables for any breaks, severe crimping, or loose connections that can cause an open circuit. Make sure the cable connectors do not have damaged pins. On the I/O board, make sure the 4–pin jumper is plugged into P87. Measure the resistance of the motor. If the electrical resistance measures less than 1 Ohm, or more than 50 Ohms, replace the motor. Use Shift F3 while the alarm is active to generate an error report for your local Haas Factory Outlet and power cycle the machine.
